Refer below technical data sheet (Available BSP / NPT)
Screwed / Flange
SS ASTM A351 Grade CF8 / CF8M, Forged Brass
| Nitrile (NBR) | EPDM | Viton (FKM) | PTFE |
| -30° C to 90° C | -10° C to 140° C | -10° C to 180° C | -10° C to 180° C |
-10° C to 70° C
Air, Water, Chemical, Gas, Oil, Steam, LPG.
Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment.
| 24AC | 110AC | 230AC | 12DC | 24DC |
| 9W | 9W | 9W | 10W | 11W |
90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application.
Available on Request.
High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require.
Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.
Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright.
AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2
| Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm² | Max. Operating Pressure Kg/cm² | Seal & Diaphragm Material | Flow Factor Kv m³ / hr |
|---|---|---|---|---|---|---|---|
| MCN-B703E | Brass | ⅜” | 15.5 | 0 | 7 | NBR / EPDM / VITON | 2.5 |
| MCN-B704E | Brass | ⅜” | 12 | 0 | 10 | NBR / EPDM / VITON | 2.5 |
| MCN-B203E | Brass | ½” | 15.5 | 0 | 7 | NBR / EPDM / VITON | 3.1 |
| MCN-B204E | Brass | ½” | 12 | 0 | 10 | NBR / EPDM / VITON | 2.3 |
| MCN-204E | CF8 / CF8M | ½” | 15 | 0 | 10 | NBR / EPDM / VITON / PTFE | 2.5 |
| MCN-203E | CF8 / CF8M | ½” | 17 | 0 | 7 | NBR / EPDM / VITON | 3.2 |
| MCN-303E | CF8 / CF8M | ¾” | 20 | 0 | 7 | NBR / EPDM / VITON | 5 |
| MCN-304E | CF8 / CF8M | ¾” | 18 | 0 | 10 | NBR / EPDM / VITON | 2.1 |
| MCN-403E | CF8 / CF8M | 1” | 25.5 | 0 | 7 | NBR / EPDM / VITON / PTFE | 8.2 |
| MCN-613I | CF8 / CF8M | 1½” | 38 | 0 | 4 | NBR / EPDM / VITON | 18.2 |
| MCN-813I | CF8 / CF8M | 2” | 46.5 | 0 | 4 | NBR / EPDM / VITON | 31.4 |
| Model No. | Port Size | Diagram No. | A | B | C | D | E | E1 |
|---|---|---|---|---|---|---|---|---|
| MCN-B703E | ⅜” | 19.1 | 57 | 107 | 93 | 46 | 38 | 49 |
| MCN-B203E | ½” | 19.1 | 57 | 107 | 93 | 46 | 38 | 49 |
| MCN-B204E | ½” | 19.1 | 54 | 94 | 80 | - | 38 | 49 |
| MCN-203E | ½” | 19.1 | 69 | 109 | 95 | 56 | 38 | 49 |
| MCN-303E | ¾” | 19.1 | 76 | 114 | 98 | 62 | 38 | 49 |
| MCN-304E | ¾” | 19.1 | 65 | 101 | 85 | - | 38 | 49 |
| MCN-403E | 1” | 19.1 | 100 | 122 | 102 | 75 | 38 | 49 |
| MCN-613I | 1½” | 19.1 | 108 | 151 | 124 | 89 | 50 | 62 |
| MCN-813I | 2” | 19.1 | 130 | 170 | 130 | 107 | 50 | 62 |
Note:- All dimensions are in mm. In normally open valve dimension B&C will increase up to 8mm.
