+91 851 109 8822
sales@uflowvalve.com

Quick Links :

3/2 - 2/2 Way Direct Acting Valve (NC / NO) - DAS Series

  • Valve Information
  • Coil Information
  • Pneumatic Circuit Diagram
  • Technical Data
  • Diagram & Dimension (NC)
Port

Refer below technical data sheet (Available BSP / NPT)

End Connection

Screwed

Body Material

SS ASTM A351 Grade 304 / 316,Brass Bar, Aluminium

Media Temp & seal o ring
Nitrile(NBR)EPDMViton(FKM)PTFE
-30°C to 90°C-10°C to 140°C-10°C to 180°C-10°C to 180°C
Circumstance Temp

-10° C to 70° C

Media

Air, Chemical, Gas, Oil, Steam, Hot Water, Oil.

Main Features

Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals,Chemical application & Highly corrosive environment.

Operating Voltage & Power Consumption
24AC110AC230AC12DC24DC
9W9W9W10W11W
Optional Feature

90% Power saver series also available

Other Specification Data

Available on Request

Coil Features

High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as required.

Coil Housing

Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure.

Note

Use of filter in the inlet port is recommended.

Solenoid Valve Manufacturers Suppliers in Worldwide
Solenoid Valve Manufacturers Suppliers in Exporter
Model No. Body Material Pipe (Inch) Orifice (mm) Min. Operating Pressure Kg/cm² Max. Operating Pressure Kg/cm² Seal & Diaphragm Material Flow Factor Kv m³ / hr
NC NO NC NO
DAS-TA119E025 ALUMINUM ¼” 2.5 - 0 5 NBR / SI / FKM / EPDM 0.16 -
DAS-TA104E015 Aluminium ¼” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DAS-TA105E009 Aluminium ¼” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DAS-TA111E009 Aluminium ¼ 0.9 0.9 0 25 NBR / SI / FKM / EPDM 0.03 0.03
DAS-TA118E009 Aluminium ¼ 0.9 0.9 0 40 NBR / SI / FKM / EPDM 0.03 0.018
DAS-TA104R1E015 Aluminium In : ¼”, Out : Namur 1.5 - 0 10 NBR / SI / FKM / EPDM 0.07 -
DCP-T1RBT050 Aluminium In : ¼”, Out : Namur 5 - 0 10 NBR / SI / FKM / EPDM 0.73 -
DAS-TA704E015 Aluminium ³⁄₈” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DAS-TA204E015 Aluminium ½” 1.5 1.5 0 10 NBR / SI / FKM / EPDM 0.07 0.07
DAS-TA205E009 Aluminium ½” 0.9 0.9 0 16 NBR / SI / FKM / EPDM 0.03 0.03
DAS-TA104C012 Aluminium ¼” 1.2 NA 0 10 NBR / SI / FKM / EPDM 0.04 -
2/2 Way Direct Acting Valve (NC)
Model No. Port Size Diagram No. A B C E E1
DAS-TA104E015 ¼” 18.1 45 93 83 44 60

Note:- All dimensions are in mm. In normally open valve dimension B&C will increase up to 8mm.

Unifine Engineering
Download PDF