Polyurethane Tubes Coloured - Uflow Automation | Uflow Polyurethane Tubes | Polyurethane Tubes Polyurethane Tubes Manufacturers And Suppliers In Japan, India And Other Global Countries.

Polyurethane Tubes - Pu Series

polyurethane tubes

polyurethane tubes

Recommended Pressure vs Working Temperature
Translucent Polyurethane Tube Identification Chart
Tube Size And Colour
Extra

Maximum Pressure & Ambient temperature

10 bar	9 bar	8 bar	7 bar
5°C to 30°C	30°C to 40°C	40°C to 50°C	50°C to 60°C

Specification for Polyurethane Tube

Tube OD	Tube ID	Minimum bend radius (in mm)	Blue	Black	Red	Yellow	Silver	Transparent
4	2	10	PS0402B	PS0402K	PS0402R	PS0402Y	PS0402S	PS0402T
6	4	15	PS0604B	PS0604K	PS0604R	PS0604Y	PS0604S	PS0604T
8	5	25	PS0805B	PS0805K	PS0805R	PS0805Y	PS0805S	PS0805T
10	7	30	PS1007B	PS1007K	PS1007R	PS1007Y	PS1007S	PS1007T
12	8	35	PS1208B	PS1208K	PS1208R	PS1208Y	PS1208S	PS1208T
14	10	130	PS1410B	PS1410K	PS1410R	PS1410Y	PS1410S	PS1410T
16	12	140	PS1611B	PS1611K	PS1611R	PS1611Y	PS1611S	PS1611T

Specification for Nylon Tube N6

Tube OD	Tube ID	Minimum bend radius (in mm)	Blue	Black	Red	Yellow	Silver	Transparent
4	2	20	N60402B	N60402K	N60402R	N60402Y	N60402S	N60402T
6	4	40	N60604B	N60604K	N60604R	N60604Y	N60604S	N60604T
8	6	50	N60806B	N60806K	N60806R	N60806Y	N60806S	N60806T
10	8	60	N61008B	N61008K	N61008R	N61008Y	N61008S	N61008T
12	10	80	N61210B	N61210K	N61210R	N61210Y	N61210S	N61210T
14	12	100	N61412B	N61412K	N61412R	N61412Y	N61412S	N61412T

Specification for Nylon Tube N12

Tube OD	Tube ID	Minimum bend radius (in mm)	Blue	Black	Red	Yellow	Silver	Transparent
4	2.5	20	N10425B	N10425K	N10425R	N10425Y	N10425S	N10425T
6	4	40	N10604B	N10604K	N10604R	N10604Y	N10604S	N10604T
8	6	50	N10806B	N10806K	N10806R	N10806Y	N10806S	N10806T
10	8	60	N11008B	N11008K	N11008R	N11008Y	N11008S	N11008T
12	9	80	N11209B	N11209K	N11209R	N11209Y	N11209S	N11209T
14	12	100	N11412B	N11412K	N11412R	N11412Y	N11412S	N11412T

Usage Instructions :

Step	Instruction
1	Cut the tube - end burr free and square, using Tube cutter ( WC1 ) and clean the edge to ensure leak tight joints. (Do not use blunt tools / hacksaw / chisel etc.)
2	Ensure the tube is fully inserted into the fitting - until the positive stop, beyond the 'U' seal.
3	For ensuring proper insertion, pull the tube gently by hand. Polyurethane tube will yield and come out if pulled heavily.
4	Minimum bend radius of the tubing to avoid leakage.

Advantages Provide differentiation of air line in pneumatic circuits.