• Valve Information
  • Actuator (Spring Return) Type
  • Diverting
  • Mixing
  • Opration
  • Technical Data
Port

Refer below technical data sheet (Available BSP / NPT)

End Connection

Screw End / Flange

Body Material

SS ASTM A351 Grade CF8

Seal

PTFE / VITON

Circumstance Temp

-10°C to 70°C

Media Temp

-10°C to 180°C

Media

Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot Water

Leakage

As per ANSI B16.104 - 1976Teflon seating class IV. For other soft seating class VI Drop Tight/Bubble Tight.

Stem Packing

Self adjusting, Spring loaded Teflon packing.

Air Quality

Lubricated /Non-lubricated.

Cover

CF8

Plate

CF8

Working Pressure

4.5 to 7 bar air (Not Recommended actuator for pneumatic pressure above 7 bar)

Life

1 million cycle

Other Technical Data

Available on Request

Seal Material

NBR / VITON

  • Valves can be used for introducing two different fluids (mixing) through two different ports to common port 'AB'.
  • One fluid coming through port 'AB' can be diverted to 'A' port or 'B' port
  • In normal condition, 'A' port is closed and 'AB' port is connected to 'B' or 'B' port is connected to 'AB' port. On receiving pilot pressure, 'A"port is connected to 'AB' or 'AB' port is connected to 'A' closing port B.
Model No. Body Material Pipe (Inch) Orifice (mm) Min. Operating Pressure Kg/cm² Max. Operating Pressure Kg/cm² Seal & ‘O’ Ring Material Flow Factor Kv m³ / hr
TCP-8Z CF8 2" 45 0 7 PTFE 35
Unifine Engineering